STATIONARY WASHER

Contact Us

BIGWASH

BIGWASH comes in 4 sizes and cleans most motor and sailboats up to 16 meters (53 feet). It consists of a U shaped aluminum frame. The frame requires a dock space of 7.2 to maximum 8.2 meters. BIGWASH is operated by remote control from the dock.

BIGWASH has 8-10 rotating brushes made from non-abrasive plastic. A collection basin for cleaning residue is located under the machine.

How it works

The boat is driven in between the beams after the basin gate has been lowered. The boat is secured and the gate is closed. The cleaning is activated with a handheld remote control unit. The rotating brushes automatically align with the hull. The brushes move along the boat all the way to the stern and back, clearing the boat of marine fouling.

For a 10-meter boat the whole process takes less than 15 minutes.

How drive-in Boatwash works

  1. Dock inside the U-shape and turn of the engine
  2. The operator starts the rotation of the brushes and the brushes  will go under the boat and back again
  3. The brushes will naturally form around the hull on both motor- and sail-boats
  1. No chemicals are used in the process that is purely mechanical
  2. No damage to the hull
  3. The procedure take 10-15 min and leave the boat with a clean hull

Clean the large majority of motor- and sailboats

One machine can wash 6,000 washes per year.
It’s 1,000 ships that are on average 6 times.

Installation requirements

Image result for check mark symbol image blue Landing space : width 8.5mm and depth 3.5m

Image result for check mark symbol image blue Standard electrical network: 3 phases 400 V (can be changed)

Image result for check mark symbol image blue Electricity connection

Image result for check mark symbol image blue Mobile crane

Image result for check mark symbol image blue Transport

Image result for check mark symbol image blueTwo containers of 12.19m for large wash and one for a little wash

The buyer is responsible for the following

    1. Legal licenses and approvals

2. Standard for electrical network

3.Works in the field of electrical connection (if exists)

4. Arrangements for landing and electricity approx. 8.5m space dock, 3.5m depth

5. Local installation estimate the workforce of four installers 3 days and one electrician for 1/2 days

6. Rent a crane

7. Participation in the final admission test at the construction

WASHABLE BOATS

The BIGWASH hull cleaner is able to clean up to 95% of the boats in an average leisure harbor. The following sketches and measurements define which boats can use the cleaner.

BIGWASH-12 cleans most motor and sail boats of up to 12 m long, 4 m in width and 2.3 m deep. It requires approximately 7.2 m of dock space.

BIGWASH-14 cleans most motor and sailboats of up to 14 m in length, 4 m in width and 2.3 m depth. This requires 7.2 m of dock space.

BIGWASH-14 WIDE cleans most motor and sailboats of up to 14 m in length, 5 m in width and 2.4 m depth. It takes up just 8.2 m of dock space.

BIGWASH-16 WIDE cleans most motor and sailboats of up to 16 m in length, 5 m in width and 2.4 m depth. It requires only 8.2 m of dock space